Plas-Tanks Industries is an ISO-9001 registered composite vessel manufacturer, that also holds the ASME RTP-1® for pressure and vacuum vessels as well. We serve the water and wastewater treatment industry with:
• Reinforced Thermoset Plastic (RTP)
• Brine makers RTP
• Storage tanks RTP
• Mixing tanks RTP
• Process vessels
Economical Solutions and Dependability
The Ideal Salt Handling Method- Saturated sodium chloride brine, continuously produced in an automated FRP bulk storage brine-maker, is ideal for distributing salt in industrial processes. A consistent NaCl brine concentration over a wide temperature range permits accurate volume metering. In-plant pumping of brine through plastic pipes almost eliminates undesirable impurities. Most importantly, capital costs for brine systems are 20-30%. Of those for dry salt storage and conveying systems, with appreciably lower operating costs.
DOWNFLOW BRINE MAKING
The downflow brining principle ensures consistent brine saturation. As influent water rises, higher-density brine sinks. Sludge from rock and solar salt is concentrated at the bottom of the Bryneer where it can be periodically removed.
In many commercial brine makers, inlet water is not distributed evenly. Eventually, this results in the formation of salt pillars in the vessels, which may collapse and damage the vessel. The Bryneer eliminates this problem by using an induction header around the inside circumference of the vessel.
RAPID LOADING WITHOUT THE DUST
A pneumatic loading and air venting system is designed for rapid loading, easy maintenance, and minimum dust emissions. The fill pipe is mounted for center fill using a long radius turn to minimize particle attrition while water is introduced to minimize dust.
EFFECTIVE LIQUID LEVEL CONTROL SYSTEM
The Bryneer incorporates a unique brine level control system to open and close a valve in the water inlet line. The level control can be set for any desired liquid level. The digital level control is contained in a corrosion-resistant waterproof box. The unit comes complete with a digital display indicative of the brine solution level.
Plas-Tanks Industries’ tough, damage-resistant, fiberglass-reinforced plastic shell is constructed to withstand many years of brine-making with little to no maintenance required.
NATIONAL SANITATION FOUNDATION (NSF) APPROVED
Plas-Tanks’ Bryneer is NSF-61 certified to control the potentially adverse health effects of products added directly to water for its treatment, storage, and transmission.